Book a virtual appointment today!

QETTLE Signature

Make a statement with a beautifully engineered, British-made QETTLE Signature boiling water tap. Available in brushed or coloured finishes, Signature taps dispense 100°C boiling water, filtered drinking water and normal hot and cold flows.

Buy Signature Modern Buy Signature Classic Buy Signature Mini
Signature Modern Signature Modern
Signature Modern Signature Modern
Signature Mini

2 YEAR WARRANTY

BRITISH BY DESIGN

100℃ BOILING WATER

RATED EXCELLENT ON TRUSTPILOT

*Colour finishes are carried out in the UK in a small-batch, dedicated procedure so please allow 6 weeks for delivery. Every beautiful colour finished QETTLE is unique. Subtle, tonal differences to those shown digitally can occur.

Signature Modern

QETTLE Modern Stainless Steel
QETTLE Modern Black
QETTLE Modern Brass
QETTLE Modern Gunmetal
QETTLE Modern Copper

Beautifully engineered from stainless steel with understated styling, safe to use and easy to install, a QETTLE Signature Modern tap gives you the simplicity of four flows from a single spout – 100°C boiling water, filtered drinking water and normal hot and normal cold water. It’s tap perfection.

Handles feature tactile, knurled detail, whilst the standard, buffed finish perfectly complements stainless steel appliances, fittings and fixtures. Our colour finishes – each and every one unique – never fail to make a statement at your sink. Choose from copper, brass, gunmetal or black.

from £795
or £79.50 p/m

Buy

Signature Classic

QETTLE Modern Stainless Steel
QETTLE Modern Black
QETTLE Modern Brass
QETTLE Modern Gunmetal
QETTLE Modern Copper

Over 40 years of design and manufacturing heritage are reflected in the elegant proportions of QETTLE Signature Classic. But whilst its form might be traditional, its function is cutting edge. 100°C boiling water, filtered drinking water, plus normal hot and cold flows.

Signature Classic taps feature a gently flared base and spout, with white lever handles working beautifully on Belfast or butler sinks. Our choice of brass, gunmetal, black and copper colour finishes perfectly complement rustic kitchens.

from £795
or £79.50 p/m

Buy

*Colour finishes are carried out in the UK in a small-batch, dedicated procedure so please allow 6 weeks for delivery. Every beautiful colour finished QETTLE is unique. Subtle, tonal differences to those shown digitally can occur.

Signature Mini

Beautifully engineered from marine grade stainless steel in the UK with understated styling, QETTLE Signature Mini taps are safe to use, easy to install and provide the simplicity of two flows from a single spout - 100°C boiling water and filtered drinking water.

The perfect partner for a QETTLE Signature Mixer tap, or can be used to great effect on a smaller sink or island.

from £625
or £62.50 p/m

Buy

QETTLE in colour

Every QETTLE Signature tap is unique. The colours – brass, gunmetal, black and copper – are achieved by colouring each, individual part of the tap using a specialised PVD process. No two coloured QETTLEs are the same, and whilst tonal differences can occur, this unique characteristic should be regarded as part of the beauty and appeal of the tap’s finish.

Colour finishing our QETTLE Signature taps is a dedicated, small-batch procedure that can sometime incur a modest wait time. But the final result, a lustrous, individual and highly durable finish – won’t fail to turn heads.

Metallic Accents and Influences

Make a colour statement at your sink with QETTLE Signature. Bright brass or warm copper perfectly complement kitchens with metallic accents; gunmetal and matte black work beautifully in monochrome, urban and industrial schemes.

PURCHASE YOUR UNIQUE QETTLE IN COLOUR

Whats In The Box

The Q08 is the water conditioning cartridge for use with QETTLE boiling water taps. It has been specially formulated from superior quality, extruded carbon block and is extremely effective at removing chlorine, chemicals and sediment from your QETTLE's flow of filtered drinking water. The Q08 also works hard to prevent limescale from adhering to the heating element inside your QETTLE's boiler tank.
All of the fitting components and parts needed for a standard tap system fitting. Does not contain a pressure reducing valve.
Simple and clear installation guide for keen DIYers and Installers alike. There’s also an installation video on our YouTube channel.
Select from 2, 4 or 7 litre boiler tanks for 4, 8 or 14 cups of boiling water in one go.
Housing for the filter cartridge which connects the mains water, the boiler tank and the tap.

Patented Technology

Designed for Safety,
Engineered for Performance

Over 50 years of leading UK innovation, design and engineering brings QETTLEs to thousands of homes each year.

From the unrivalled value of QETTLE Original to the glorious style of QETTLE Signature colour finishes, our taps deliver unmatched safety and efficiency.

QETTLE’s patented design ingenuity featuring four separate inlet hoses deliver the exact amount of true, 100℃ boiling or filtered drinking water, when you need it.

Insulation ensures the spout, apart from the tip, is always safe to touch and once the safety cap is removed, our safety button means an exact action is required to dispense boiling water. The button must be pushed down and the handle turned at the same time.

Energy efficient boiler tanks are insulated to maintain optimum 100℃ temperature to ensure great-tasting water, every time.

Tap specification

A QETTLE tap will fit into a 35mm diameter tap hole, which is the standard sized tap hole – perfect if you’re replacing an existing kitchen tap.

QETTLE Signature Classic taps require a 10cm clearance to ensure your lever handles can move freely - measured from the centre of the tap hole, between your tap and the windowsill, splashback etc. We do have a solution if a QETTLE Signature Classic is your tap of choice but you don't have enough clearance - please contact us, we're happy to help.

Tap Specifications
Tap Specifications

Signature Modern

Signature Classic

Installation your way

Whether you’re fitting your QETTLE yourself, engaging a plumber or using a QETTLE Accredited Installer, it’s reassuring to know that installing a QETTLE is fuss-free.

If you’re still doing your homework, a great place to start is our pre-install checklist, which covers everything you need to know from water pressure to working out what will go where under the sink. Our step-by-step installation video is a must-watch.

Installation Checklist

For further information, click through to the full checklist at the bottom.
Pressure Gauge

Connection to a mains water supply, with both the hot and the cold water having a pressure between 1.5 Bar and 5 Bar for a QETTLE Original, or a cold water supply between 1.5 and 5 Bar for a QETTLE Mini.

Pressure Gauge

A standard 13 Amp plug socket to plug in your boiler tank.

Stop Cock

The ability to shut off the water.

Waste Connection

An under sink waste pipe already in place.

Space for your Boiler

Room for your boiler under the sink.

Diameter

A 35mm hole for the tap and space behind the tap.


Checklist in Full >

Demand for Accredited Installations is high, so please be aware that getting your QETTLE in and kettle out could take a little longer than usual.

Check to see if a QETTLE Accredited Installer is available in your area.

Close

INSTALLATION AREA CHECK

Check to see if your area is covered by one of our QETTLE certified installers

Sorry we can't find that postcode. Please try again?
loading

INSTALLATION AREA CHECK

Good news! We offer installation in your area:

Please select installation when buying a QETTLE tap and we will take care of everything.

QETTLE Care

Keeping your QETTLE tap in tip top condition is easy. You should replace your QETTLE’s filter cartridge twice a year and deep clean your tap’s boiler tank annually. Both are quick and easy jobs you can do yourself, without the need for an engineer or making a dent in your pocket.

QETTLE Care

In Action

QETTLE in Action

QETTLE Original

4-in-1 Boiling Water Tap

from £545.00
LEARN MORE

Signature Modern

4-in-1 Boiling Water Tap

from £795.00
LEARN MORE

Signature Classic

4-in-1 Boiling Water Tap

from £795.00
LEARN MORE

Signature Mini

2-in-1 Boiling Water Tap

from £625.00
LEARN MORE

Original Mini

2-in-1 Boiling Water Tap

from £480.00
LEARN MORE

Bundles

Matching boiling & mixer taps

from £885.00
LEARN MORE

Mixer Taps

Mixer Taps

from £260.00
LEARN MORE

QETTLE Patterns

4-in-1 Boiling Water Tap

from £795.00
LEARN MORE
  • How do boiling water taps work?
    Watch QETTLE's Todd and Dan explain how a boiling water tap works, and understand the difference between a true boiling water tap and an instant hot water tap. A QETTLE tap is connected to an undersink boiler tank and filter system. Boiling water taps are indispensable for everything from instant hot drinks to speedy pans of boiling water for pasta, rice and vegetables. The best boiling water taps are 4 in 1 taps, which in addition to boiling water, also provide filtered drinking water, plus normal hot and cold flows of water.
  • How much is a boiling water tap?
    At around just over £500.00 for a complete QETTLE boiling water tap, QETTLE is much more affordable than other 100°C boiling water taps. However, our secret is the ingenious, fully patented tech inside a QETTLE tap. Unlike other boiling water taps, QETTLE does not use expensive, electronic parts. Instead, it uses an award-winning, British-designed mechanical internal system which significantly reduces its cost. Maintenance is simple and inexpensive, and no specialist servicing is required. We have been innovating multi-functional kitchen taps for over 50 years, and we are justly proud of QETTLE’s clever design, performance and affordability. Why not spread the cost of your QETTLE by opting for our new, easy payments with 0% interest?
  • Are boiling water taps safe?
    A QETTLE boiling water tap could be considered as much safer than a kettle. Not only do QETTLE boiling water taps feature two-stage safety and a cool-touch spout, but, unlike a kettle, they are fixed in one place, cannot be pulled by a cable, and cannot topple over, spilling dangerous volumes of boiling water. All QETTLE taps come with a safety clip. When in place, the clip makes it impossible for boiling water to be dispensed. But even with the clip removed, it is still necessary for the tap’s handle lock to be deactivated before boiling water can be accessed. A small button on the tap’s handle must be pressed down at the same time as the handle is turned clockwise. Only then can boiling water be dispensed.
  • What size are the boiler tanks?
    There are three sizes of boiler tanks. 2L, 4L and 7L. A 2L tank provides up to 4 cups of boiling water in one go and is ideal for two-people households. 4L tanks deliver up to 8 cups of boiling water in one go and are our best-selling tank. A 7L boiler tank will provide up to 14 cups of boiling water in one go, so is ideal for larger families and small office/commercial environments.
    QETTLE Boiler Sizes - 2L, 4L and 7L

2 YEAR WARRANTY

BRITISH BY DESIGN

100℃ BOILING WATER

RATED EXCELLENT ON TRUSTPILOT

Information
Customer service
Ciphe
QETTLE

QETTLE Finance available from DivideBuy

Trustpilot
DESIGNERS & SHOWROOMS

Offer a unique QETTLE experience by joining our QETTLE Retailer network

© QETTLE 2018 - 2025 . QETTLE is a trading name of GREG ROWE LIMITED and is protected by the following patents US9,958,075, GB1515293.7, CN208237133 and the following patent applications 1517097.0 PCT/GB2016/052893, 1717969.8. Registered address: Old Winery Business Park, Chapel Street, Cawston, Norfolk NR10 4FE
Interest free credit agreements provided by Zopa Bank Limited trading as DivideBuy are not regulated by the Financial Conduct Authority and do not fall under the jurisdiction of the Financial Ombudsman Service. Zopa Bank Limited trading as DivideBuy is authorised by the Prudential Regulation Authority and regulated by the Financial Conduct Authority and the Prudential Regulation Authority, and entered on the Financial Services Register (800542). Zopa Bank Limited (10627575) is incorporated in England & Wales and has its registered office at: 1st Floor, Cottons Centre, Tooley Street, London, SE1 2QG. VAT Number 281765280. DivideBuy's trading address is First Floor, Brunswick Court, Brunswick Street, Newcastle-under-Lyme, ST5 1HH. © Zopa Bank Limited 2024. All rights reserved